. Home Products Events Enquiry Contact Blog
+44 (0)1256 892194
UV Spot Curing Systems are used in many fields, such as medical devices, optoelectronic, electronic, optics and general assembly, for applications to spot cure UV Adhesives, coatings and encapsulants.with powers up to 20,000mw/cm2. Increased power allows curing through some polymers. Various optics are available and advanced lamps have microprocessor control and built in radiometry. UV Curing Conveyors are used  for hardening of uv adhesives, uv inks, lacquers and epoxies. UV Adhesives/Coatings/Epoxies are among the materials that are designed for the fast, precise and strong bonding of electronic and optical components or devices. Featuring low stress, optical clarity, and minimal shrinkage upon cure, EMI’s OPTOCAST™ range represents the “new generation” of adhesive systems designed for the demanding applications of opto- electronics. Modular Microwave Powered UV Curing Lamps are designed for small but high intensity applications such as uv adhesive curing, pen printing, ink jet print cure and electronic coatings. Suitable for operation where instant operation and cool operation are required and in clean rooms. All systems are available with dichroic reflectors and can be set up for automated manufacturing systems. UV Radiometers for accurate and calibrated measurement of UV from EIT INC (USA). Integrating radiometers are available that give power and intensity readings in mW and mJ/cm2. UV ranges that can be selected are UVC (250-260nm), UVB (260-320nm), UVA (320- 390nm) and UVV (390-445nm). The UVIMAP plots data against time. Relative intensity monitors are available that can measure and alert operators to drop off in UV over time due to ageing. UV LED Curing offers an exciting new alternative to conventional UV curing lamps, overcoming many of the limitations of these little changed methods. With accurate irradiation, LEDs enable the precision UV Curing of materials that is just not possible with lamps.
UV Curing Conveyor
UV Curing Conveyor
Heat Seal Banding Machine
Benchtop Banding Machine
UV Spot Cure Systems Lumens/Excelitas UV Curing Flood Lamp System UV Curing System UV Radiometer
Microwave UV Curing Systems

UV Curing

UV Drying, UV Spot Curing Systems, UV Curing Lamps

Supplying UV curing systems that are advanced, simple-to-use and reliable. Utilizing significant UV curing expertise and innovative control technology, Jenton UV harnesses its capabilities to ensure that their UV curing products are of the highest quality and provide customers with maximum process efficiency while significantly reducing downtime and overall production costs.
Products and Services
Jenton International UK 9/10 Ardglen Industrial Estate, Evingar Road, Whitchurch, HAMPSHIRE  RG28 7BB  UNITED KINGDOM Tel:+44 (0)1256 892194            Fax:+44 (0)1256 896486               sales@jenton.co.uk
Jenton International is a part of the Jenton Group of companies specialising in the supply and support of technically innovative products for the Packaging, Banding, UV Curing, UV Disinfection, UV LED, Converting industries & Viscosity Control, as well as the food automation packaging industry with Jenton-Ariana 
Capability in Packaging, UV, Converting
JENTON GROUP 
UV Curing Flood Lamp Systems
          UV Radiometer Intensity Meter
UV Spot Curing Systems are used in many fields, such as medical devices, optoelectronic, electronic, optics and general assembly, for applications to spot cure UV adhesives, coatings and encapsulants.with powers up to 20,000mw/cm2. Increased power allows curing through some polymers. Various optics are available and advanced lamps have microprocessor control and built in radiometry. UV Curing Conveyors are used  for hardening of uv adhesives, uv inks, lacquers and epoxies. UV Adhesives/Coatings/Epoxies are among the materials that are designed for the fast, precise and strong bonding of electronic and optical components or devices. Featuring low stress, optical clarity, and minimal shrinkage upon cure, EMI’s OPTOCAST™ range represents the “new generation” of adhesive systems designed for the demanding applications of opto-electronics. Modular Microwave Powered UV Curing Lamps are designed for small but high intensity applications such as uv adhesive curing, pen printing, ink jet print cure and electronic coatings. Suitable for operation where instant operation and cool operation are required and in clean rooms. All systems are available with dichroic reflectors and can be set up for automated manufacturing systems. UV Radiometers for accurate and calibrated measurement of UV from EIT INC (USA). Integrating radiometers are available that give power and intensity readings in mW and mJ/cm2. UV ranges that can be selected are UVC (250-260nm), UVB (260-320nm), UVA (320- 390nm) and UVV (390-445nm). The UVIMAP plots data against time. Relative intensity monitors are available that can measure and alert operators to drop off in UV over time due to ageing. UV LED Curing offers an exciting new alternative to conventional UV curing lamps, overcoming many of the limitations of these little changed methods. With accurate irradiation, LEDs enable the precision UV Curing of materials that is just not possible with lamps.
.
UV Curing Conveyor
UV Curing Conveyor
Benchtop Banding Machine
UV Spot Cure Systems Lumens UV Curing Flood Lamp System

UV Curing

UV Drying, UV Spot Curing Systems, UV Curing Lamps

Supplying UV curing systems that are advanced, simple-to-use and reliable. Utilizing significant UV curing expertise and innovative control technology, Jenton UV harnesses its capabilities to ensure that their UV curing products are of the highest quality and provide customers with maximum process efficiency while significantly reducing downtime and overall production costs.
Heat Seal Banding Machine
UV Curing System UV Radiometer
UV Curing System
Capability in Packaging, UV, Converting
Menu
JENTON Group
UV Product Range 
UV Curing Flood Lamp Systems
UV Radiometer