A MULTIPLE HOLE PUNCHING UNIT- MP - 3000

Designed to allow the converter a quick, light, multiple-hole, interchangeable unit that can be moved from machine to machine instantly. The unit is available in standard 4", 8" or 12" throat. It is a versatile, lightweight unit that can hold multiple single hole punching units. Interchangeable sizes are 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" 9/16", 5/8"; with an adapter: 3/4" and 1" punches are available:
 

4" - up to 3 punching units
8" - up to 5 punching units
12" - up to 7 punching units
 

This unit can be designed for many special configurations. Standard spacing across the unit is 1-1/2". Other spacings can be quoted on request. The unit can also be fitted with a variety of cutters including pouch cut shapes or slitting knives. The unit may be slotted for infinite adjustability.
 

The clamping end of all Punchettes are made to fit a 1/2" x 1-1/2" mounting bar. All air and electrical parts are interchangeable with Ejecto Punchette.
 

Utilizing a heavy-duty repairable cylinder, requiring only inside replacement parts for a lifetime of use.

FEATURES / BENEFITS
. Special sizes and spacings quoted on request
. Fits any intermittent converting machine
. Air powered/electrically activated
. Interchangeable holes: 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" and 5/8"
. Available in three sizes: 4", 8", and 12" throat depth
. Low in cost, operation and maintenance
. Patent No. 3-524-368
. Off-the-shelf delivery