V-NOTCH CUTTER                  VC-32000

Envelope type cutter for notching out corners of bags. Uses the principle of holding the web taut with a sprung pad, while the film is being cut. The slug is automatically blown through at the bottom of the stroke after the material has been cut. For any intermittent bag machine, instant installation: just attach plant air and impulse from bag machine to electric lines. This unit uses Ejecto style cutter. The "V" Notch standard size is 3" depth and 60 degree included angle.
Other sizes can be quoted on request.

• Available for linear low density polythene

EJECTO HANDLE-BAG CUTOUT         HC-3000

Self-contained air-electric "Ejecto style" unit for handle bag cutouts. Mounts on any intermittent bag machine. Unit makes an oblong cut 3/4" x 3" or 1" x 31/2" with a 11/4" long uncut area for flap support. It has two carrying tabs for passing through nip rollers and easy hand push out. Total depth is 21/4" to center. Also available with a 9" throat. No metal to metal contact. Minimum wear, low maintenance.

• Available for linear low density polythene